Features

SIP Trunking Features

Eight capabilities behind Edesy SIP trunking - what each one does, how it works, and what it does not do.

Bring your own PBX

Standard SIP

API included

The short answer

Edesy SIP trunking gives you self-serve termination trunks with their own SIP host on port 5070 (UDP or TCP), IP allowlist or digest authentication, per-trunk call limits (concurrent calls and a max call duration up to 60 minutes), Indian numbers you route to SIP destinations, bring-your-own-carrier recipes, trunk call logs and a FreePBX guide. Calls cost Rs 0.50/min with a 60-second pulse, and unanswered calls are free.

Call limits

Caps you set per trunk, so one stuck call or one busy hour can't run up your bill

Max call duration

Set the longest an outbound call through the trunk may last, in minutes, on the trunk page's Call limits card. The platform ceiling is 60 minutes. When a call reaches it, Edesy hangs up both sides. Useful for stopping runaway AI voice agent calls.

Max concurrent calls

Cap how many calls the trunk carries at once, from 1 to 10,000 (default 50). Calls over the cap are declined at the SIP layer before they are placed, so they cost nothing.

Wallet-aware calls

A call can also end sooner if your prepaid balance only covers a shorter call, so keep the wallet topped up before long calls.

Guides and docs

Explore more comparisons, alternatives, and resources

Connect your PBX to Edesy

Provision a trunk, point your PBX at it, and place a test call in both directions.